Haibike Nduro 6 Full Sus Electric Mountain Bike 2022, Mix Wheel, Yamaha 750Wh – Black/Orange

Haibike Nduro 6 Full Sus Electric Mountain Bike 2022, Mix Wheel, Yamaha 750Wh – Black/Orange

Haibike Nduro 6 Full  Haibike Nduro 6 Full  The all-new Yamaha PW-X3 drive system and whopping 750Wh in-tube battery will get you up while an excellent set of components will get you down nice and quick!

Similar to its bigger brother the Haibike Nduro 7 has a Yamaha PW-X2 motor that is lighter than the 2021 version yet still packs a punch with its 85Nm of torque. The 750Wh battery should give all you need for a busy day on the enduro trails too.

For the downhill stretches there’s plenty of good stuff too! For agility and ride quality the bike is mulletted with a 29” wheel on the front and 27.5” on the back, and these come with a Schwalbe Magic Mary tyre on the front and a Big Betty on the rear.  The air-sprung Fox 38 Performance forks and Fox Performance damper both have 180mm of travel for those bumps and jumps.

The pedal drive train is a 12-speed Shimano SLX7100 system on a 10-51t cassette. Stopping power comes with the Magura MT7 disc brakes, both front and rear on 203mm rotors. Ride position is optimised with a 34.9 remote controlled dropper post.

For all round serious fun on the enduro tracks and trails, this is altogether a beast!

Yamaha PW-X3

High Output

Through a complete drive unit redesign, PW-X3 delivers 85Nm of motor torque throughout a wide cadence range. The PW-X3 design is committed to motor performance, keeping the high torque output figures despite the drastic size and weight reduction.

Natural, Agile Response

Right from the beginning, every PW-X series drive unit has featured the 128mm ISIS interface bottom bracket axle that gives the best Q-factor in any e-bike system. Yamaha Motor’s new PW-X3 continues with this idealized layout, making it especially attractive to expert riders. Exclusive mechanical components and control program realize an unparalleled level of maneuverability. The reduced backlash of the ratchet mechanism and lightweight designs for major moving parts, such as the axle shaft and reduction gear, contributes to a quicker, more direct response to pedaling. Fundamental design choices create the Yamaha distinctive feature of providing instant support with full torque immediately after pressure is applied to the pedal, not after certain crank turn.

Compact & Lightweight

The new PW-X3 is approximately 20% smaller and 10% lighter than the PW-X2 model. Its ultra-compact dimensions offer e-bike manufacturers greater freedom to develop nice-looking bikes aiming for ideal frame geometry and suspension kinematics, as well as increased ground clearance.

Automatic Support Mode for E-MTB Ride

The PW-X3’s exclusively tuned Automatic Support Mode delivers optimal assist in settings ranging from trail riding to racing by choosing from the bike’s three riding modes -Eco, Standard, and High- as conditions demand. The system reduces assist on level roads but boosts power on steep inclines to offer fine-grained assist feel that makes it seem like it’s reading the rider’s mind.

Key Features:

• Frame: Haibike Nduro Full Sus, Aluminium – 41cm,44cm,47cm,50cm
• Motor: Yamaha PW-X3 Drive System, 250w, 85Nm
• Battery: Yamaha InTube 750Wh
• Frame Shock: RockShox Super Deluxe Select
• Suspension Fork: RockShox Domain R Air, 180mm
• Gearing: Sram GX Eagle, 12 Speed
• Brakes: TRP Slate G-Spec Hydraulic Disc, Adjustable Grip Width, 203mm
• Display: Yamaha Interface-X
• Wheels: WTB ST i30 TCS, 27.5″/29″ x Haibike The Hub++
• Front Tyre: Schwalbe Magic Mary Evo TLE, 29 x 2.4″
• Rear Tyre: Schwalbe Big Betty Evo Gravity, 27.5 x 2.6″
• Battery Range: Yamaha InTube 750Wh – 40-140 Power Assisted Miles*

Yamaha PW-X3

High Output

Through a complete drive unit redesign, PW-X3 delivers 85Nm of motor torque throughout a wide cadence range. The PW-X3 design is committed to motor performance, keeping the high torque output figures despite the drastic size and weight reduction.

Natural, Agile Response

Right from the beginning, every PW-X series drive unit has featured the 128mm ISIS interface bottom bracket axle that gives the best Q-factor in any e-bike system. Yamaha Motor’s new PW-X3 continues with this idealized layout, making it especially attractive to expert riders. Exclusive mechanical components and control program realize an unparalleled level of maneuverability. The reduced backlash of the ratchet mechanism and lightweight designs for major moving parts, such as the axle shaft and reduction gear, contributes to a quicker, more direct response to pedaling. Fundamental design choices create the Yamaha distinctive feature of providing instant support with full torque immediately after pressure is applied to the pedal, not after certain crank turn.

Compact & Lightweight

The new PW-X3 is approximately 20% smaller and 10% lighter than the PW-X2 model. Its ultra-compact dimensions offer e-bike manufacturers greater freedom to develop nice-looking bikes aiming for ideal frame geometry and suspension kinematics, as well as increased ground clearance.

Automatic Support Mode for E-MTB Ride

The PW-X3’s exclusively tuned Automatic Support Mode delivers optimal assist in settings ranging from trail riding to racing by choosing from the bike’s three riding modes -Eco, Standard, and High- as conditions demand. The system reduces assist on level roads but boosts power on steep inclines to offer fine-grained assist feel that makes it seem like it’s reading the rider’s mind.

–

Battery Specifications:

• Battery Range: Yamaha InTube 750Wh – 40-140 Power Assisted Miles*

Extra Information:

• This Electric Bike will be SUPPLIED ASSEMBLED complete with charger and everything you see included.
• Upon arrival, simple attachment of the pedals and the straightening of the handlebar will be required.